MESH 86-Box Two-Way Switch

Keep two-way switching and add wireless automation

KT-MESH-DCS-1G controls one two-way circuit with mechanical switching, app control, occupancy and daylight automation.

Discuss your project View capabilities

180 mWSpecified standby power

1 CircuitOne two-way circuit

86 BoxStandard wall-box fit

KT-MESH-DCS-1G two-way switch product photo

MESH 86 Actuator

Product Capability

Local and smart control for one circuit

Fits an 86-type wall box and uses a relay to switch one two-way circuit alongside a compatible mechanical switch. Add presence or light sensors for automated lighting.

Mechanical two-way compatibility

Control one load from two locations for corridor ends, stairs and existing two-way circuits.

Local button and mode control

Short-press to switch; hold at least five seconds and release to toggle automation. Local operation remains available during wireless outages if powered.

Occupancy-driven switching

With a compatible HPS, set occupied-on, vacant-off and delay. A new occupied message cancels a pending off action.

Daylight thresholds and off priority

Set a 1–65535 lux threshold. When enabled daylight-off conditions hold, occupancy messages do not turn lights back on.

Status and mode indicators

Red indicates detected off and green detected on. A breathing effect indicates automation is enabled.

App control and configuration

Use KT-LINK for provisioning, groups, state queries and OTA. Disable automation when sustained manual control is needed.

Product Details

Product views and configuration details

Product photos, interface details and specifications from the current manuals. Open an image for a closer view.

Typical two-way schematic; use the delivered wiring drawing for installation

Manual side-view dimensions; verify the delivered enclosure and wall-box clearance

Model: KT-MESH-DCS-1G
Rated input: 220 V / 50 Hz, live and neutral
Rated load current: 10 A at 220 V; verify load compatibility
Standby power: 180 mW
Minimum reliable detection load: 25 W (manual specification)
Face size / box clear depth: 82 × 82 mm / 28 mm
Vacancy off delay: 10–65535 s
Wireless distance: 10–50 m, environment dependent

Two-way switching controls one load from two locations. This device provides on/off control and requires sensors for automation. Installation needs live and neutral and a qualified electrician; confirm load ratings against the final nameplate and load type.

Explore the complete KT-MESH lighting solution

Application Scenarios

Designed for practical industrial environments

Combine this product with other HIMATRIX software and hardware as a complete edge-to-cloud solution.

Corridor endsStairwaysClassroom lightingTwo-way retrofits

Need a configuration proposal?

Tell us about your site, devices and control goals. We will recommend a suitable product combination.